HP1 Safety beam sensor, single set of safety beams with 5m cable and controller

Detection Method: Active Infrared Detection
Detection Range: 15cm to 10m (0.5 to 32.8ft)
Sensor Dimensions Controller: 43.7mm (W), 114.2mm (H), 29mm (D)
Sensor Head: 15mm diameter
Power Supply: 12 to 30V AC or DC
Power Consumption: Max 1W (at 12V~30V)
Output Relay: 1C Type (one switching contact) 24V 1A (Resistance Load)
Response Time: Under 50ms
Relay Hold: Time 0.8sec
Sensitivity Adjustment: Potentiometer Cable Length: 5m
Sunlight Resistance: 100,000 Lux
Operating Temperature: -30°C to +55°C, (-22°F to 131°F)
Weight: 220g (0.49 lbs)


Successor of BP2-1