Access Control Unit M1000E fitted with 1 input for 1 external reader
Replaced by M2000PE
Access Control Unit fitted with 1 input for 1 external reader.
Using the 4 button keypad and 3 digit display, new codes can be programmed in memory (a radio transmission for RF or via the connected reader cards or tags).
Canceling single codes or all the codes, set the relay activation mode and time, setting a password is all accomplished via a simple sequence via the 4 button.
- 1000 users
- 1 input for reader, activated through reader or remote control MHz
- 1 relay output 5A
- Receiver integrated for radio transmitters
- integrated keypad for programming
- users memory management with GTSYSTEMXP and WINGTSYSTEM
- ABS box for internal use or DIN rail mountable
- REX button input
Technical specifications
Power supply 12-24 Vac/dc
Consumption: min. 30 mA - max. 90 mA
Inputs: 1 Receiver, 4 CH, 1 input Wiegand 26, 30, 37 bit (default Wiegand 30)
Relay outputs: 1
Relay mode: time lag 1 - 180s
Relay contact capacity: 5 A
Programming: with 4 keys and display
Operating temperature: from -20° to +55° C
Protection rating IP 44
Dimensions and weight: 70 x 90 x 60 mm - 260 g
Are you an installer? Ask us for your special price installer!!
Access Control Unit fitted with 1 input for 1 external reader.
Using the 4 button keypad and 3 digit display, new codes can be programmed in memory (a radio transmission for RF or via the connected reader cards or tags).
Canceling single codes or all the codes, set the relay activation mode and time, setting a password is all accomplished via a simple sequence via the 4 button.
- 1000 users
- 1 input for reader, activated through reader or remote control MHz
- 1 relay output 5A
- Receiver integrated for radio transmitters
- integrated keypad for programming
- users memory management with GTSYSTEMXP and WINGTSYSTEM
- ABS box for internal use or DIN rail mountable
- REX button input
Technical specifications
Power supply 12-24 Vac/dc
Consumption: min. 30 mA - max. 90 mA
Inputs: 1 Receiver, 4 CH, 1 input Wiegand 26, 30, 37 bit (default Wiegand 30)
Relay outputs: 1
Relay mode: time lag 1 - 180s
Relay contact capacity: 5 A
Programming: with 4 keys and display
Operating temperature: from -20° to +55° C
Protection rating IP 44
Dimensions and weight: 70 x 90 x 60 mm - 260 g
Are you an installer? Ask us for your special price installer!!
Read more..
Replaced by:
Replaced by / No longer available
This product is no longer available. If a replacement product is available you will see this item above.
Specifications
- Article number 23003116
- Article number manufacturer M1000E
- Number of users 999
- Number of channels 1
- Output relay 1
- Power 12 - 24 Vdc
- Timezones N
- Length x Width x Depth 70 x 90 x 60 mm
Stand-alone
Access control consists in checking if a person or vehicle showing at a point of entry (office, building, parking…) owns all rights necessary to properly do so. This control is made installing a combination of products using different technologies, according to every installation requirements and specifications: proximity readers (RFID technology), long range (UHF technology), biometrics, radio, magnetic, simple stand-alone control units or centralised units…
For each installation, PRASTEL strives to offer the highest level of security using the proper technology, in line with the requirements whilst anticipating possible expansions.
To that purpose, PRASTEL range includes both simple stand-alone products to control 1 or 2 doors, and complex solutions able manage up to 840 doors.
Read more..
